Celeron N2810 vs V-Series V140
Primary details
Comparing V-Series V140 and Celeron N2810 processor market type (desktop or notebook), architecture, sales start time and price.
| Place in performance ranking | not rated | not rated |
| Place by popularity | not in top-100 | not in top-100 |
| Market segment | Laptop | Laptop |
| Series | AMD V-Series | Intel Celeron |
| Architecture codename | Champlain (2010−2011) | Bay Trail-M (2013−2014) |
| Release date | 4 October 2010 (13 years ago) | 11 September 2013 (10 years ago) |
| Launch price (MSRP) | no data | $260 |
| Current price | $18.47 | $150 (0.6x MSRP) |
Detailed specifications
V-Series V140 and Celeron N2810 basic parameters such as number of cores, number of threads, base frequency and turbo boost clock, lithography, cache size and multiplier lock state. These parameters indirectly say of CPU speed, though for more precise assessment you have to consider their test results.
| Physical cores | 1 (Single-Core) | 2 (Dual-core) |
| Threads | 1 | 2 |
| Base clock speed | no data | 2 GHz |
| Boost clock speed | 2.3 GHz | 2 GHz |
| Bus support | 3200 MHz | no data |
| L1 cache | 128 KB | 56K (per core) |
| L2 cache | 512 KB | 512K (per core) |
| L3 cache | no data | 0 KB |
| Chip lithography | 45 nm | 22 nm |
| Maximum core temperature | no data | 100 °C |
| 64 bit support | + | + |
| Windows 11 compatibility | - | - |
| Unlocked multiplier | No | No |
Compatibility
Information on V-Series V140 and Celeron N2810 compatibility with other computer components: motherboard (look for socket type), power supply unit (look for power consumption) etc. Useful when planning a future computer configuration or upgrading an existing one. Note that power consumption of some processors can well exceed their nominal TDP, even without overclocking. Some can even double their declared thermals given that the motherboard allows to tune the CPU power parameters.
| Number of CPUs in a configuration | no data | 1 |
| Socket | S1 | FCBGA1170 |
| Power consumption (TDP) | 25 Watt | 7.5 Watt |
Technologies and extensions
Technological solutions and additional instructions supported by V-Series V140 and Celeron N2810. You'll probably need this information if you require some particular technology.
| Instruction set extensions | Integrated DDR3 memory controller, MMX, 3DNow, SSE, SSE2, SSE3, SSE4A, AMD64, Enhanced Virus Protection, Virtualization | no data |
| AES-NI | no data | - |
| VirusProtect | + | no data |
| Enhanced SpeedStep (EIST) | no data | + |
| Turbo Boost Technology | no data | - |
| Hyper-Threading Technology | no data | - |
| Idle States | no data | + |
| Smart Connect | no data | + |
| Status | no data | Discontinued |
| RST | no data | - |
Security technologies
V-Series V140 and Celeron N2810 technologies aimed at improving security, for example, by protecting against hacks.
| EDB | no data | + |
| Identity Protection | no data | - |
| Anti-Theft | no data | - |
Virtualization technologies
Virtual machine speed-up technologies supported by V-Series V140 and Celeron N2810 are enumerated here.
| AMD-V | + | no data |
| VT-d | no data | - |
| VT-x | no data | + |
Memory specs
Types, maximum amount and channel quantity of RAM supported by V-Series V140 and Celeron N2810. Depending on the motherboard, higher memory frequencies may be supported.
| Supported memory types | DDR3 | DDR3 |
| Maximum memory size | no data | 8 GB |
| Max memory channels | no data | 2 |
Graphics specifications
General parameters of integrated GPUs, if any.
| Integrated graphics card | no data | Intel® HD Graphics for Intel Atom® Processor Z3700 Series |
| Graphics max frequency | no data | 756 MHz |
Graphics interfaces
Available interfaces and connections of V-Series V140 and Celeron N2810 integrated GPUs.
| Number of displays supported | no data | 2 |
Peripherals
Specifications and connection of peripherals supported by V-Series V140 and Celeron N2810.
| PCIe version | no data | 2.0 |
| PCI Express lanes | no data | 4 |
| USB revision | no data | 3.0 and 2.0 |
| Total number of SATA ports | no data | 2 |
| Number of USB ports | no data | 5 |
Synthetic benchmark performance
Various benchmark results of the processors in comparison. Overall score is measured in points in 0-100 range, higher is better.
Cinebench 10 32-bit single-core
Cinebench R10 is an ancient ray tracing benchmark for processors by Maxon, authors of Cinema 4D. Its single core version uses just one CPU thread to render a futuristic looking motorcycle.
Benchmark coverage: 20%
V-Series V140 outperforms Celeron N2810 by 93% in Cinebench 10 32-bit single-core.
3DMark06 CPU
3DMark06 is a discontinued DirectX 9 benchmark suite from Futuremark. Its CPU part contains two scenarios, one dedicated to artificial intelligence pathfinding, another to game physics using PhysX package.
Benchmark coverage: 19%
Celeron N2810 outperforms V-Series V140 by 5% in 3DMark06 CPU.
wPrime 32
wPrime 32M is a math multi-thread processor test, which calculates square roots of first 32 million integer numbers. Its result is measured in seconds, so that the less is benchmark result, the faster the processor.
Benchmark coverage: 18%
V-Series V140 outperforms Celeron N2810 by 8% in wPrime 32.
Cinebench 11.5 64-bit multi-core
Cinebench Release 11.5 Multi Core is a variant of Cinebench R11.5 which uses all the processor threads. A maximum of 64 threads is supported in this version.
Benchmark coverage: 17%
Celeron N2810 outperforms V-Series V140 by 20% in Cinebench 11.5 64-bit multi-core.
Pros & cons summary
| Recency | 4 October 2010 | 11 September 2013 |
| Physical cores | 1 | 2 |
| Threads | 1 | 2 |
| Chip lithography | 45 nm | 22 nm |
| Power consumption (TDP) | 25 Watt | 7 Watt |
We couldn't decide between V-Series V140 and Celeron N2810. We've got no test results to judge.
Should you still have questions on choice between V-Series V140 and Celeron N2810, ask them in Comments section, and we shall answer.
Similar processor comparisons
We picked several similar comparisons of processors in the same market segment and performance relatively close to those reviewed on this page.
