Celeron M 430 vs Sempron LE-1300
Primary details
Comparing Sempron LE-1300 and Celeron M 430 processor market type (desktop or notebook), architecture, sales start time and price.
| Place in the ranking | not rated | not rated |
| Place by popularity | not in top-100 | not in top-100 |
| Market segment | Desktop processor | Laptop |
| Series | no data | Celeron M |
| Architecture codename | Sparta (2007) | Yonah (2005−2006) |
| Release date | October 2007 (17 years ago) | no data (2024 years ago) |
| Launch price (MSRP) | $12 | no data |
Detailed specifications
Sempron LE-1300 and Celeron M 430 basic parameters such as number of cores, number of threads, base frequency and turbo boost clock, lithography, cache size and multiplier lock state. These parameters indirectly say of CPU speed, though for more precise assessment you have to consider their test results.
| Physical cores | 1 (Single-Core) | 1 (Single-Core) |
| Threads | 1 | 1 |
| Base clock speed | no data | 1.73 GHz |
| Boost clock speed | 2.3 GHz | 1.73 GHz |
| Bus rate | no data | 533 MHz |
| L1 cache | 128 KB | no data |
| L2 cache | 512 KB | no data |
| L3 cache | 0 KB | 1 MB L2 KB |
| Chip lithography | 65 nm | 65 nm |
| Maximum core temperature | no data | 100 °C |
| 64 bit support | + | - |
| Windows 11 compatibility | - | - |
| VID voltage range | no data | 1.0V-1.3V |
Compatibility
Information on Sempron LE-1300 and Celeron M 430 compatibility with other computer components: motherboard (look for socket type), power supply unit (look for power consumption) etc. Useful when planning a future computer configuration or upgrading an existing one. Note that power consumption of some processors can well exceed their nominal TDP, even without overclocking. Some can even double their declared thermals given that the motherboard allows to tune the CPU power parameters.
| Number of CPUs in a configuration | 1 | no data |
| Socket | AM2 | PPGA478 |
| Power consumption (TDP) | 45 Watt | 27 Watt |
Technologies and extensions
Technological solutions and additional instructions supported by Sempron LE-1300 and Celeron M 430. You'll probably need this information if you require some particular technology.
| Enhanced SpeedStep (EIST) | no data | - |
| Turbo Boost Technology | no data | - |
| Hyper-Threading Technology | no data | - |
| Idle States | no data | - |
| Demand Based Switching | no data | - |
| PAE | no data | 32 Bit |
| FSB parity | no data | - |
Security technologies
Sempron LE-1300 and Celeron M 430 technologies aimed at improving security, for example, by protecting against hacks.
| TXT | no data | - |
| EDB | no data | + |
Virtualization technologies
Virtual machine speed-up technologies supported by Sempron LE-1300 and Celeron M 430 are enumerated here.
| VT-x | no data | - |
Synthetic benchmark performance
Various benchmark results of the processors in comparison. Overall score is measured in points in 0-100 range, higher is better.
Passmark
Passmark CPU Mark is a widespread benchmark, consisting of 8 different types of workload, including integer and floating point math, extended instructions, compression, encryption and physics calculation. There is also one separate single-threaded scenario measuring single-core performance.
Pros & cons summary
| Power consumption (TDP) | 45 Watt | 27 Watt |
Celeron M 430 has 66.7% lower power consumption.
We couldn't decide between Sempron LE-1300 and Celeron M 430. We've got no test results to judge.
Note that Sempron LE-1300 is a desktop processor while Celeron M 430 is a notebook one.
Should you still have questions on choice between Sempron LE-1300 and Celeron M 430, ask them in Comments section, and we shall answer.
Similar processor comparisons
We picked several similar comparisons of processors in the same market segment and performance relatively close to those reviewed on this page.
