C-70 vs Phenom II X4 N930
Primary details
Comparing Phenom II X4 N930 and C-70 processor market type (desktop or notebook), architecture, sales start time and price.
| Place in the ranking | 2467 | not rated |
| Place by popularity | not in top-100 | not in top-100 |
| Market segment | Laptop | Laptop |
| Series | 4x AMD Phenom II | AMD C-Series |
| Power efficiency | 2.66 | no data |
| Architecture codename | Champlain (2010−2011) | Ontario (2011−2012) |
| Release date | 12 May 2010 (14 years ago) | 1 September 2012 (12 years ago) |
Detailed specifications
Phenom II X4 N930 and C-70 basic parameters such as number of cores, number of threads, base frequency and turbo boost clock, lithography, cache size and multiplier lock state. These parameters indirectly say of CPU speed, though for more precise assessment you have to consider their test results.
| Physical cores | 4 (Quad-Core) | 2 (Dual-core) |
| Threads | 4 | 2 |
| Base clock speed | no data | 1 GHz |
| Boost clock speed | 2 GHz | 1.33 GHz |
| Bus rate | 3600 MHz | no data |
| L1 cache | 512 KB | 64K (per core) |
| L2 cache | 2 MB | 512K (per core) |
| L3 cache | no data | 0 KB |
| Chip lithography | 45 nm | 40 nm |
| Die size | no data | 75 mm2 |
| 64 bit support | + | + |
| Windows 11 compatibility | - | - |
Compatibility
Information on Phenom II X4 N930 and C-70 compatibility with other computer components: motherboard (look for socket type), power supply unit (look for power consumption) etc. Useful when planning a future computer configuration or upgrading an existing one. Note that power consumption of some processors can well exceed their nominal TDP, even without overclocking. Some can even double their declared thermals given that the motherboard allows to tune the CPU power parameters.
| Number of CPUs in a configuration | no data | 1 |
| Socket | S1 | FT1 BGA 413-Ball |
| Power consumption (TDP) | 35 Watt | 9 Watt |
Technologies and extensions
Technological solutions and additional instructions supported by Phenom II X4 N930 and C-70. You'll probably need this information if you require some particular technology.
| Instruction set extensions | MMX, 3dNow!, SSE (2,3,4A), AMD64, Enhanced Virus Protection, Vurtualization, HyperTransport 3.0 | MMX(+), SSE(1,2,3,3S,4A), AMD-V, Radeon HD 6290 (276-400 MHz) |
| VirusProtect | + | - |
Virtualization technologies
Virtual machine speed-up technologies supported by Phenom II X4 N930 and C-70 are enumerated here.
| AMD-V | - | + |
Memory specs
Types, maximum amount and channel quantity of RAM supported by Phenom II X4 N930 and C-70. Depending on the motherboard, higher memory frequencies may be supported.
| Supported memory types | DDR3 | DDR3 Single-channel |
Graphics specifications
General parameters of integrated GPUs, if any.
| Integrated graphics card | no data | AMD Radeon HD 6290 |
Synthetic benchmark performance
Various benchmark results of the processors in comparison. Overall score is measured in points in 0-100 range, higher is better.
Passmark
Passmark CPU Mark is a widespread benchmark, consisting of 8 different types of workload, including integer and floating point math, extended instructions, compression, encryption and physics calculation. There is also one separate single-threaded scenario measuring single-core performance.
GeekBench 5 Single-Core
GeekBench 5 Single-Core is a cross-platform application developed in the form of CPU tests that independently recreate certain real-world tasks with which to accurately measure performance. This version uses only a single CPU core.
GeekBench 5 Multi-Core
GeekBench 5 Multi-Core is a cross-platform application developed in the form of CPU tests that independently recreate certain real-world tasks with which to accurately measure performance. This version uses all available CPU cores.
Cinebench 10 32-bit single-core
Cinebench R10 is an ancient ray tracing benchmark for processors by Maxon, authors of Cinema 4D. Its single core version uses just one CPU thread to render a futuristic looking motorcycle.
Cinebench 10 32-bit multi-core
Cinebench Release 10 Multi Core is a variant of Cinebench R10 using all the processor threads. Possible number of threads is limited by 16 in this version.
3DMark06 CPU
3DMark06 is a discontinued DirectX 9 benchmark suite from Futuremark. Its CPU part contains two scenarios, one dedicated to artificial intelligence pathfinding, another to game physics using PhysX package.
wPrime 32
wPrime 32M is a math multi-thread processor test, which calculates square roots of first 32 million integer numbers. Its result is measured in seconds, so that the less is benchmark result, the faster the processor.
Cinebench 11.5 64-bit multi-core
Cinebench Release 11.5 Multi Core is a variant of Cinebench R11.5 which uses all the processor threads. A maximum of 64 threads is supported in this version.
Pros & cons summary
| Recency | 12 May 2010 | 1 September 2012 |
| Physical cores | 4 | 2 |
| Threads | 4 | 2 |
| Chip lithography | 45 nm | 40 nm |
| Power consumption (TDP) | 35 Watt | 9 Watt |
Phenom II X4 N930 has 100% more physical cores and 100% more threads.
C-70, on the other hand, has an age advantage of 2 years, a 12.5% more advanced lithography process, and 288.9% lower power consumption.
We couldn't decide between Phenom II X4 N930 and C-70. We've got no test results to judge.
Should you still have questions on choice between Phenom II X4 N930 and C-70, ask them in Comments section, and we shall answer.
Similar processor comparisons
We picked several similar comparisons of processors in the same market segment and performance relatively close to those reviewed on this page.
