Celeron N2830 vs i5-6400
Primary details
Comparing Core i5-6400 and Celeron N2830 processor market type (desktop or notebook), architecture, sales start time and price.
| Place in performance ranking | 1526 | not rated |
| Place by popularity | not in top-100 | not in top-100 |
| Cost-effectiveness evaluation | 0.70 | no data |
| Market segment | Desktop processor | Laptop |
| Series | Intel Core i5 | Intel Celeron |
| Architecture codename | Skylake (2015−2016) | Bay Trail-M (2013−2014) |
| Release date | 1 September 2015 (9 years ago) | 23 February 2014 (10 years ago) |
| Launch price (MSRP) | $187 | $107 |
Cost-effectiveness evaluation
Performance per price, higher is better.
Detailed specifications
Core i5-6400 and Celeron N2830 basic parameters such as number of cores, number of threads, base frequency and turbo boost clock, lithography, cache size and multiplier lock state. These parameters indirectly say of CPU speed, though for more precise assessment you have to consider their test results.
| Physical cores | 4 (Quad-Core) | 2 (Dual-core) |
| Threads | 4 | 2 |
| Base clock speed | 2.7 GHz | 2.16 GHz |
| Boost clock speed | 3.3 GHz | 2.41 GHz |
| Bus type | DMI 3.0 | no data |
| Bus rate | 4 × 8 GT/s | no data |
| Multiplier | 27 | no data |
| L1 cache | 256 KB | 112 KB |
| L2 cache | 1 MB | 1 MB |
| L3 cache | 6 MB | 0 KB |
| Chip lithography | 14 nm | 22 nm |
| Die size | 122 mm2 | no data |
| Maximum core temperature | no data | 100 °C |
| Maximum case temperature (TCase) | 72 °C | no data |
| 64 bit support | + | + |
| Windows 11 compatibility | - | - |
Compatibility
Information on Core i5-6400 and Celeron N2830 compatibility with other computer components: motherboard (look for socket type), power supply unit (look for power consumption) etc. Useful when planning a future computer configuration or upgrading an existing one. Note that power consumption of some processors can well exceed their nominal TDP, even without overclocking. Some can even double their declared thermals given that the motherboard allows to tune the CPU power parameters.
| Number of CPUs in a configuration | 1 (Uniprocessor) | 1 |
| Socket | FCLGA1151 | FCBGA1170 |
| Power consumption (TDP) | 65 Watt | 7.5 Watt |
Technologies and extensions
Technological solutions and additional instructions supported by Core i5-6400 and Celeron N2830. You'll probably need this information if you require some particular technology.
| Instruction set extensions | Intel® SSE4.1, Intel® SSE4.2, Intel® AVX2 | no data |
| AES-NI | + | - |
| AVX | + | - |
| vPro | + | no data |
| Enhanced SpeedStep (EIST) | + | + |
| Turbo Boost Technology | 2.0 | - |
| Hyper-Threading Technology | - | - |
| Idle States | + | + |
| Thermal Monitoring | + | - |
| Smart Connect | no data | + |
| Status | Discontinued | Discontinued |
| RST | no data | - |
Security technologies
Core i5-6400 and Celeron N2830 technologies aimed at improving security, for example, by protecting against hacks.
| TXT | - | no data |
| EDB | + | + |
| Secure Key | + | + |
| MPX | + | - |
| Identity Protection | + | - |
| SGX | Yes with Intel® ME | no data |
| OS Guard | + | no data |
| Anti-Theft | no data | - |
Virtualization technologies
Virtual machine speed-up technologies supported by Core i5-6400 and Celeron N2830 are enumerated here.
| AMD-V | + | - |
| VT-d | + | - |
| VT-x | + | + |
| EPT | + | no data |
Memory specs
Types, maximum amount and channel quantity of RAM supported by Core i5-6400 and Celeron N2830. Depending on the motherboard, higher memory frequencies may be supported.
| Supported memory types | DDR3, DDR4 | DDR3 |
| Maximum memory size | 64 GB | 8 GB |
| Max memory channels | 2 | 2 |
| Maximum memory bandwidth | 34.134 GB/s | no data |
Graphics specifications
General parameters of integrated GPUs, if any.
| Integrated graphics card | Intel HD Graphics 530 | Intel® HD Graphics for Intel Atom® Processor Z3700 Series |
| Max video memory | 64 GB | no data |
| Quick Sync Video | + | + |
| Clear Video | + | no data |
| Clear Video HD | + | - |
| Graphics max frequency | 950 MHz | 750 MHz |
| InTru 3D | + | - |
Graphics interfaces
Available interfaces and connections of Core i5-6400 and Celeron N2830 integrated GPUs.
| Number of displays supported | 3 | 2 |
| eDP | + | no data |
| DisplayPort | + | - |
| HDMI | + | - |
| DVI | + | no data |
Graphics image quality
Maximum display resolutions supported by Core i5-6400 and Celeron N2830 integrated GPUs, including resolutions over different interfaces.
| 4K resolution support | + | no data |
| Max resolution over HDMI 1.4 | 4096x2304@24Hz | no data |
| Max resolution over eDP | 4096x2304@60Hz | no data |
| Max resolution over DisplayPort | 4096x2304@60Hz | no data |
| Max resolution over VGA | N/A | no data |
Graphics API support
APIs supported by Core i5-6400 and Celeron N2830 integrated GPUs, sometimes API versions are included.
| DirectX | 12 | no data |
| OpenGL | 4.5 | no data |
Peripherals
Specifications and connection of peripherals supported by Core i5-6400 and Celeron N2830.
| PCIe version | 3.0 | 2.0 |
| PCI Express lanes | 16 | 4 |
| USB revision | no data | 3.0 and 2.0 |
| Total number of SATA ports | no data | 2 |
| Number of USB ports | no data | 5 |
Synthetic benchmark performance
Various benchmark results of the processors in comparison. Overall score is measured in points in 0-100 range, higher is better.
Passmark
Passmark CPU Mark is a widespread benchmark, consisting of 8 different types of workload, including integer and floating point math, extended instructions, compression, encryption and physics calculation. There is also one separate single-threaded scenario measuring single-core performance.
GeekBench 5 Single-Core
GeekBench 5 Single-Core is a cross-platform application developed in the form of CPU tests that independently recreate certain real-world tasks with which to accurately measure performance. This version uses only a single CPU core.
GeekBench 5 Multi-Core
GeekBench 5 Multi-Core is a cross-platform application developed in the form of CPU tests that independently recreate certain real-world tasks with which to accurately measure performance. This version uses all available CPU cores.
Cinebench 10 32-bit single-core
Cinebench R10 is an ancient ray tracing benchmark for processors by Maxon, authors of Cinema 4D. Its single core version uses just one CPU thread to render a futuristic looking motorcycle.
Cinebench 10 32-bit multi-core
Cinebench Release 10 Multi Core is a variant of Cinebench R10 using all the processor threads. Possible number of threads is limited by 16 in this version.
Cinebench 11.5 64-bit multi-core
Cinebench Release 11.5 Multi Core is a variant of Cinebench R11.5 which uses all the processor threads. A maximum of 64 threads is supported in this version.
Cinebench 15 64-bit multi-core
Cinebench Release 15 Multi Core is a variant of Cinebench R15 which uses all the processor threads.
Cinebench 15 64-bit single-core
Cinebench R15 (standing for Release 15) is a benchmark made by Maxon, authors of Cinema 4D. It was superseded by later versions of Cinebench, which use more modern variants of Cinema 4D engine. The Single Core version (sometimes called Single-Thread) only uses a single processor thread to render a room full of reflective spheres and light sources.
Cinebench 11.5 64-bit single-core
Cinebench R11.5 is an old benchmark by Maxon, authors of Cinema 4D. It was superseded by later versions of Cinebench, which use more modern variants of Cinema 4D engine. The Single Core version loads a single thread with ray tracing to render a glossy room full of crystal spheres and light sources.
Pros & cons summary
| Recency | 1 September 2015 | 23 February 2014 |
| Physical cores | 4 | 2 |
| Threads | 4 | 2 |
| Chip lithography | 14 nm | 22 nm |
| Power consumption (TDP) | 65 Watt | 7 Watt |
i5-6400 has an age advantage of 1 year, 100% more physical cores and 100% more threads, and a 57.1% more advanced lithography process.
Celeron N2830, on the other hand, has 828.6% lower power consumption.
We couldn't decide between Core i5-6400 and Celeron N2830. We've got no test results to judge.
Note that Core i5-6400 is a desktop processor while Celeron N2830 is a notebook one.
Should you still have questions on choice between Core i5-6400 and Celeron N2830, ask them in Comments section, and we shall answer.
Similar processor comparisons
We picked several similar comparisons of processors in the same market segment and performance relatively close to those reviewed on this page.
