i5-10400F vs Celeron B710
Primary details
Comparing Celeron B710 and Core i5-10400F processor market type (desktop or notebook), architecture, sales start time and price.
| Place in the ranking | not rated | 913 |
| Place by popularity | not in top-100 | 12 |
| Cost-effectiveness evaluation | no data | 23.20 |
| Market segment | Laptop | Desktop processor |
| Series | Intel Celeron | no data |
| Power efficiency | no data | 11.94 |
| Architecture codename | Sandy Bridge (2011−2013) | Comet Lake (2020) |
| Release date | 19 June 2011 (13 years ago) | 30 April 2020 (4 years ago) |
| Launch price (MSRP) | $70 | $155 |
Cost-effectiveness evaluation
Performance per price, higher is better.
Detailed specifications
Celeron B710 and Core i5-10400F basic parameters such as number of cores, number of threads, base frequency and turbo boost clock, lithography, cache size and multiplier lock state. These parameters indirectly say of CPU speed, though for more precise assessment you have to consider their test results.
| Physical cores | 1 (Single-Core) | 6 (Hexa-Core) |
| Threads | 1 | 12 |
| Base clock speed | 1.6 GHz | 2.9 GHz |
| Boost clock speed | 1.6 GHz | 4.3 GHz |
| Bus type | DMI 2.0 | no data |
| Bus rate | 4 × 5 GT/s | 8 GT/s |
| Multiplier | 16 | no data |
| L1 cache | 64K (per core) | 64K (per core) |
| L2 cache | 256K (per core) | 256K (per core) |
| L3 cache | 1.5 MB (shared) | 12 MB (shared) |
| Chip lithography | 32 nm | 14 nm |
| Die size | 131 mm2 | no data |
| Maximum core temperature | 100 °C | 100 °C |
| Maximum case temperature (TCase) | no data | 72 °C |
| Number of transistors | 504 million | no data |
| 64 bit support | + | + |
| Windows 11 compatibility | - | + |
Compatibility
Information on Celeron B710 and Core i5-10400F compatibility with other computer components: motherboard (look for socket type), power supply unit (look for power consumption) etc. Useful when planning a future computer configuration or upgrading an existing one. Note that power consumption of some processors can well exceed their nominal TDP, even without overclocking. Some can even double their declared thermals given that the motherboard allows to tune the CPU power parameters.
| Number of CPUs in a configuration | 1 (Uniprocessor) | 1 |
| Socket | PGA988,PPGA988 | FCLGA1200 |
| Power consumption (TDP) | 35 Watt | 65 Watt |
Technologies and extensions
Technological solutions and additional instructions supported by Celeron B710 and Core i5-10400F. You'll probably need this information if you require some particular technology.
| Instruction set extensions | Intel® SSE4.1, Intel® SSE4.2 | Intel® SSE4.1, Intel® SSE4.2, Intel® AVX2 |
| AES-NI | - | + |
| FMA | + | - |
| AVX | - | + |
| Enhanced SpeedStep (EIST) | + | + |
| Turbo Boost Technology | - | 2.0 |
| Hyper-Threading Technology | - | + |
| Idle States | + | + |
| Thermal Monitoring | + | + |
| Flex Memory Access | + | no data |
| Demand Based Switching | - | no data |
| Turbo Boost Max 3.0 | no data | - |
| FDI | + | no data |
| Fast Memory Access | + | no data |
Security technologies
Celeron B710 and Core i5-10400F technologies aimed at improving security, for example, by protecting against hacks.
| TXT | - | + |
| EDB | + | + |
| Secure Key | no data | + |
| Identity Protection | - | + |
| SGX | no data | Yes with Intel® ME |
| OS Guard | no data | + |
| Anti-Theft | - | no data |
Virtualization technologies
Virtual machine speed-up technologies supported by Celeron B710 and Core i5-10400F are enumerated here.
| VT-d | - | + |
| VT-x | + | + |
| EPT | no data | + |
Memory specs
Types, maximum amount and channel quantity of RAM supported by Celeron B710 and Core i5-10400F. Depending on the motherboard, higher memory frequencies may be supported.
| Supported memory types | DDR3 | DDR4 |
| Maximum memory size | 16 GB | 128 GB |
| Max memory channels | 2 | 2 |
| Maximum memory bandwidth | 21.335 GB/s | 41.6 GB/s |
Graphics specifications
General parameters of integrated GPUs, if any.
| Integrated graphics card | Intel® HD Graphics for 2nd Generation Intel® Processors | no data |
| Graphics max frequency | 1 GHz | no data |
Graphics interfaces
Available interfaces and connections of Celeron B710 and Core i5-10400F integrated GPUs.
| Number of displays supported | 2 | no data |
| eDP | + | no data |
| DisplayPort | + | - |
| HDMI | + | - |
| SDVO | + | no data |
| CRT | + | no data |
Peripherals
Specifications and connection of peripherals supported by Celeron B710 and Core i5-10400F.
| PCIe version | 2.0 | 3.0 |
| PCI Express lanes | 16 | 16 |
Synthetic benchmark performance
Various benchmark results of the processors in comparison. Overall score is measured in points in 0-100 range, higher is better.
Passmark
Passmark CPU Mark is a widespread benchmark, consisting of 8 different types of workload, including integer and floating point math, extended instructions, compression, encryption and physics calculation. There is also one separate single-threaded scenario measuring single-core performance.
Cinebench 10 32-bit single-core
Cinebench R10 is an ancient ray tracing benchmark for processors by Maxon, authors of Cinema 4D. Its single core version uses just one CPU thread to render a futuristic looking motorcycle.
wPrime 32
wPrime 32M is a math multi-thread processor test, which calculates square roots of first 32 million integer numbers. Its result is measured in seconds, so that the less is benchmark result, the faster the processor.
Cinebench 11.5 64-bit multi-core
Cinebench Release 11.5 Multi Core is a variant of Cinebench R11.5 which uses all the processor threads. A maximum of 64 threads is supported in this version.
x264 encoding pass 2
x264 Pass 2 is a slower variant of x264 video compression that produces a variable bit rate output file, which results in better quality since the higher bit rate is used when it is needed more. Benchmark result is still measured in frames per second.
x264 encoding pass 1
x264 version 4.0 is a video encoding benchmark uses MPEG 4 x264 compression method to compress a sample HD (720p) video. Pass 1 is a faster variant that produces a constant bit rate output file. Its result is measured in frames per second, which means how many frames of the source video file were encoded per second.
Pros & cons summary
| Recency | 19 June 2011 | 30 April 2020 |
| Physical cores | 1 | 6 |
| Threads | 1 | 12 |
| Chip lithography | 32 nm | 14 nm |
| Power consumption (TDP) | 35 Watt | 65 Watt |
Celeron B710 has 85.7% lower power consumption.
i5-10400F, on the other hand, has an age advantage of 8 years, 500% more physical cores and 1100% more threads, and a 128.6% more advanced lithography process.
We couldn't decide between Celeron B710 and Core i5-10400F. We've got no test results to judge.
Be aware that Celeron B710 is a notebook processor while Core i5-10400F is a desktop one.
Should you still have questions on choice between Celeron B710 and Core i5-10400F, ask them in Comments section, and we shall answer.
Similar processor comparisons
We picked several similar comparisons of processors in the same market segment and performance relatively close to those reviewed on this page.
